Gigabyte Z790 UD AX , Intel Z790, LGA1700, 4xDDR5, ATX

   Supports Intel® Core™ 14th/ 13th /12th processors
   Unparalleled Performance:Twin 16*+2+1 Phases Digital VRM Solution
   Dual Channel DDR5:4*DIMMs with XMP 3.0 Memory Module Support
   Next Generation Storage:4*PCIe 4.0 x4 M.2 Connectors
   Advanced Thermal Design & M.2 Thermal Guard: To Ensure VRM Power Stability & M.2 SSD Performance
   EZ-Latch Plus:M.2 Connectors with Quick Release & Screwless Design
   Fast Networks:2.5GbE LAN & Wi-Fi 6E 802.11ax
   Extended Connectivity:DP, HDMI, Front USB-C® 10Gb/s, Rear USB-C® 20Gb/s
   Smart Fan 6:Features Multiple Temperature Sensors, Hybrid Fan Headers with FAN STOP
   Q-Flash Plus:Update BIOS Without Installing the CPU, Memory and Graphics Card

* 8+8 phases parallel power design
   CPU
       LGA1700 socket: Support for the 13th and 12th Generation Intel® Core™, Pentium® Gold and Celeron® Processors
       L3 cache varies with CPU
   (Please refer "CPU Support List" for more information.)
   Chipset
       Intel® Z790 Express Chipset
   Memory
       Support for DDR5 7600(O.C.) /7400(O.C.) /7200(O.C.) /7000(O.C.) /6800(O.C.) /6600(O.C.) / 6400(O.C.) / 6200(O.C.) / 6000(O.C.) / 5800(O.C.) / 5600(O.C.) / 5400(O.C.) / 5200(O.C.) / 4800 / 4000 memory modules
       4 x DDR DIMM sockets supporting up to 128 GB (32 GB single DIMM capacity) of system memory
       Dual channel memory architecture
       Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode)
       Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules
       Support for Extreme Memory Profile (XMP) memory modules
   (Please refer "Memory Support List" for more information.)
   Onboard Graphics
   Integrated Graphics Processor-Intel® HD Graphics support:
       1 x HDMI port, supporting a maximum resolution of 4096x2160@60 Hz
       * Support for HDMI 2.0 version and HDCP 2.3.
       1 x DisplayPort, supporting a maximum resolution of 4096x2304@60
       * Support for DisplayPort 1.2 version and HDCP 2.3
   (Graphics specifications may vary depending on CPU support.)
   Audio
       Realtek® Audio CODEC
       High Definition Audio
       2/4/5.1/7.1-channel
       * You can change the functionality of an audio jack using the audio software. To configure 7.1-channel audio, access the audio software for audio settings.
       Support for S/PDIF Out
   LAN
       Realtek® 2.5GbE LAN chip (2.5 Gbps/1 Gbps/100 Mbps)
   Wireless Communication module
   Intel® Wi-Fi 6E AX210 (PCB rev. 1.0)
       WIFI a, b, g, n, ac, ax, supporting 2.4/5/6 GHz carrier frequency bands
       BLUETOOTH 5.3
       Support for 11ax 160MHz wireless standard and up to 2.4 Gbps data rate
   Intel® Wi-Fi 6E AX211 (PCB rev. 1.1)
       WIFI a, b, g, n, ac, ax, supporting 2.4/5/6 GHz carrier frequency bands
       BLUETOOTH 5.3
       Support for 11ax 160MHz wireless standard and up to 2.4 Gbps data rate
   (Actual data rate may vary depending on environment and equipment.)
   Expansion Slots
   CPU:
       1 x PCI Express x16 slot, supporting PCIe 5.0 and running at x16 (PCIEX16)
       * For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot.
   Chipset:
       1 x PCI Express x16 slots, supporting PCIe 4.0 and running at x4 (PCIEX4_1)
       1 x PCI Express x16 slots, supporting PCIe 3.0 and running at x4 (PCIEX4_2)
   Storage Interface
   CPU:
       1 x M.2 connector (Socket 3, M key, type 22110/2280 PCIe 4.0 x4/x2 SSD support) (M2A_CPU)
   Chipset:
       2 x M.2 connectors (Socket 3, M key, type 22110/2280 PCIe 4.0 x4/x2 SSD support) (M2P_SB, M2Q_SB)
       1 x M.2 connector (Socket 3, M key, type 22110/2280 SATA and PCIe 4.0 x4/x2 SSD support) (M2M_SB)
       6 x SATA 6Gb/s connectors
       * Refer to "2-8 Internal Connectors," for the installation notices for the M.2 and SATA connectors.
   RAID 0, RAID 1, RAID 5, and RAID 10 support for NVMe SSD storage devices
   RAID 0, RAID 1, RAID 5, and RAID 10 support for SATA storage devices
   USB
   Chipset:
       1 x USB Type-C® port on the back panel, with USB 3.2 Gen 2x2 support
       1 x USB Type-C® port with USB 3.2 Gen 2 support, available through the internal USB header
       2 x USB 3.2 Gen 2 Type-A ports (red) on the back panel
       5 x USB 3.2 Gen 1 ports (3 ports on the back panel, 2 ports available through the internal USB header)
   Chipset+2 USB 2.0 Hubs:
       8 x USB 2.0/1.1 ports (4 ports on the back panel, 4 ports available through the internal USB headers)
   Internal I/O Connectors
       1 x 24-pin ATX main power connector
       2 x 8-pin ATX 12V power connectors
       1 x CPU fan header
       1 x water cooling CPU fan header
       3 x system fan headers
       1 x system fan/water cooling pump header
       2 x addressable LED strip headers
       2 x RGB LED strip headers
       4 x M.2 Socket 3 connectors
       6 x SATA 6Gb/s connectors
       1 x front panel header
       1 x front panel audio header
       1 x USB Type-C® header, with USB 3.2 Gen 2 support
       1 x USB 3.2 Gen 1 header
       2 x USB 2.0/1.1 headers
       2 x Thunderbolt™ add-in card connectors
       1 x Trusted Platform Module header (For the GC-TPM2.0 SPI/GC-TPM2.0 SPI 2.0 module only)
       1 x Q-Flash Plus button
       1 x reset button
       1 x reset jumper
       1 x Clear CMOS jumper
   Back Panel Connectors
       4 x USB 2.0/1.1 ports
       2 x SMA antenna connectors (2T2R)
       2 x USB 3.2 Gen 2 Type-A ports (red)
       1 x DisplayPort
       1 x HDMI 2.0 port
       3 x USB 3.2 Gen 1 ports
       1 x USB Type-C® port, with USB 3.2 Gen 2x2 support
       1 x RJ-45 port
       1 x optical S/PDIF Out connector
       2 x audio jacks
   I/O Controller
       iTE® I/O Controller Chip
   Operating System
       Support for Windows 11 64-bit
       Support for Windows 10 64-bit
   Form Factor
       ATX Form Factor; 30.5cm x 24.4cm