Gigabyte AORUS 5000E SSD 500GB M.2 NVMe Gen4 5000/3800 MBps

   + PCIe 4.0 x4, NVMe 1.4 interface
   + Sequential Read Speed : up to 5,000MB/s**
   + Sequential Write speed : up to 3,800MB/s**
   + HMB (Host Memory Buffer) supported
   + TRIM & S.M.A.R.T supported
   + Energy-efficient


   Interface
   PCI-Express 4.0x4, NVMe 1.4
   Form Factor
   M.2 2280
   Total Capacity
   500GB
   NAND
   3D TLC NAND Flash
   Sequential Read speed
   Up to 5,000 MB/s
   Sequential Write speed
   Up to 3,800 MB/s
   Dimension
   80 x 22 x 2.3 mm
   Mean time between failure (MTBF)
   1.5 million hours
   Power Consumption (Active)
   Average : R : 4W / W : 4W
   Power Consumption(Idle)(ASPT on)
   20mW
   Temperature (Operating)
   0°C to 70°C
   Temperature (Storage)
   -40°C to 85°C
   Warranty
       1. Limited 5-years or 300TBW.
       2. Limited warranty based on 5 years or 300TBW, whichever comes first. (*TBW is evaluated by JEDEC workload standard. )
       *TBW (Terabyte Written): Terabytes Written is the total amount of data that can be written into a SSD before it is likely to fail.
       3. When the usage of an NVME SSD as indicated by the "Percentage Used" (SMART ID: 05) in SMART page of "GIGABYTE SSD toolbox" reaches 100 means out of warranty. (A new unused product will show the number of 0)
   Note
       • Test system configuration: configuration may vary by models, we will choose the latest platform for verification.
       • Performance may vary based on SSD's firmware version and system hardware & configuration. Sequential performance measurements based on CrystalDiskMark and IOmeter 1.1.0.
       • Speeds based on internal testing. Actual performance may vary.
       • 1GB = 1 billion bytes. Actual useable capacity may vary.